
Every material batch is tested for purity, particle size distribution, and electrochemical stability before official dispatch.
BMS JBD SP22S003 6S sampai 22S LiFePO4 40A sampai 100A (24 V, 48 V)
SKU: CBI-K-SP22S003
We serve university research laboratories, prototype trials, and industrial-scale supply with official tax invoices and cooperation agreements.
Technical Description
Specification Parameters
| Jumlah seri didukung | 6 sampai 22 (LiFePO4) S |
| Arus kontinu | 40 sampai 100 A |
| Arus puncak | 120 sampai 300 A, tergantung varian |
| Tegangan pengisian | 3,6 V per sel |
| Rentang tegangan sel | 2,2 sampai 3,75 V |
| Proteksi tegangan lebih sel | 3,75 V (pulih 3,60 V) |
| Proteksi tegangan kurang sel | 2,20 V (pulih 2,60 V) |
| Balancing | Pasif, mulai 3,35 V pada selisih 20 mV |
| Sensor suhu (NTC) | 1 eksternal, 1 di MOSFET, 1 di resistor balancing |
| Komunikasi | Bluetooth bawaan, UART non-isolasi; tanpa RS485 dan CAN |
| Fungsi lain | Pengenalan jumlah seri otomatis; sakelar opsional |
| Konsumsi daya saat bekerja | 15 mA |
| Ukuran papan | 130 × 65 × 10 mm |
Related Products
View all in this category
BMS JBD DP04S007 4S 12 V LiFePO4 (100A, 150A, 200A)
SKU: CBI-K-DP04S007
The JBD DP04S007 is a smart BMS for 3 to 4 series lithium packs, the size most often used to replace a 12 V lead-acid battery. JBD's LiFePO4 specification sheet lists 60 to 150 A continuous, while JBD's product page also offers a 200 A version. It uses a common port for charge and discharge, has Bluetooth built in so every cell can be checked from a phone, and provides a UART port for a display or PC. Typical cell protection limits are 3.75 V for overcharge and 2.20 V for over-discharge. JBD makes several derivatives: vehicle starting versions, series-capable versions and versions with a heating function. Tell us how the pack will be used, such as engine starting, RVs or 12 V marine systems, and the CBI team will help choose the version and current rating.

BMS JBD OH20SA01 8S sampai 20S LiFePO4 100A sampai 200A
SKU: CBI-K-OH20SA01
The JBD OH20SA01 is an acquisition-chip and MCU based BMS for high-current LiFePO4 packs of 8 to 20 series. JBD offers continuous ratings of 100, 120, 150 and 200 A, which suits heavily loaded 24 V (8S) and 48 V (16S) packs. Charge and discharge share one port. Protection parameters can be changed with JBD's PC software, and the board has one on-board temperature sensor plus two external sensors. UART is standard, while isolated RS485, CAN, Bluetooth, heating and an LCD are available as options. The official datasheet is on the jbdbms.com Download page. Send your voltage, load current and communication needs on WhatsApp and the CBI team will help define the configuration to order.

BMS JBD UP16S019 16S 100A ESS LiFePO4 48 V (Bluetooth + WiFi)
SKU: CBI-K-UP16S019
The JBD UP16S019 is a battery management system designed by JBD for home energy storage batteries and inverters. The version we use in the CBI workshop is the 16-series LiFePO4, 100 A board with Bluetooth and WiFi, ordering code JBD-UP16S019-L16S-100A-100AB-K-R-C. It uses a common port for charge and discharge, limits charging current to 10 A as standard, and talks to inverters over isolated RS485 and CAN. According to JBD, the protocols cover inverters such as Pylon, Growatt, Voltronic, Deye, GoodWe, Victron, SMA and others. The phone app shows cell voltages, temperatures and event history. For 48 V pack builders, the board brings six temperature sensing points, pre-discharge to soften inverter inrush, parallel pack support and secondary protection. The LCD and the RS485 PC cable are sold separately. JBD also offers 150 A and 200 A versions. Send us your pack layout and inverter brand on WhatsApp and the CBI team will help confirm the right version and settings.

JBD Active Balancer 5A untuk Pack 4S dan 8S
SKU: CBI-K-JBDBAL5A
Passive balancing in a BMS bleeds excess charge as heat at a small current, usually tens of milliamps. On large packs, evening out cell voltages that way can take a long time. The JBD active balancer moves energy from higher cells to lower cells at up to 5 A. JBD makes it in two sizes: 4S for 12 V packs and 8S for 24 V packs. Both work with LiFePO4, Li-ion and LCO cells. The 4S version starts at a pack voltage of about 12.5 V with ±10 mV accuracy, and the 8S version starts at about 25.6 V. The balancer complements the BMS rather than replacing it. Voltage, current and temperature protection stay with the BMS. In the CBI workshop we recommend an active balancer for packs that see frequent deep cycles or whose cells have started to drift apart.
