
Every material batch is tested for purity, particle size distribution, and electrochemical stability before official dispatch.
We serve university research laboratories, prototype trials, and industrial-scale supply with official tax invoices and cooperation agreements.
Technical Description
Specification Parameters
| Jenis sel | LiFePO4 3,2 V (JBD juga membuat versi Li-ion) |
| Jumlah seri didukung | 8 sampai 16 S |
| Tegangan sistem | 48 V (16S LiFePO4) |
| Arus kontinu | 100 (varian 150 A dan 200 A tersedia) A |
| Arus puncak | 300 A pada varian 100 A; 450 A pada 150 A; 600 A pada 200 A |
| Pembatas arus pengisian | 10 A (standar) |
| Port | Common port (isi dan pakai satu port) dengan balancing |
| Balancing | Pasif, 20 sampai 80 mA |
| Sensor suhu (NTC) | 2 di papan, 4 eksternal |
| Komunikasi | RS485 terisolasi, CAN, RS232, UART non-isolasi |
| Nirkabel | Bluetooth dan WiFi (standar) |
| Fungsi lain | Pre-discharge, proteksi sekunder, riwayat kejadian, pack paralel; heating dan sakelar opsional |
| Ukuran papan | 300 × 100 × 26 mm (100 A dan 150 A); 300 × 100 × 28 mm (200 A) |
| Tidak termasuk | Layar LCD dan kabel RS485 untuk PC |
Related Products
View all in this category
BMS JBD DP04S007 4S 12 V LiFePO4 (100A, 150A, 200A)
SKU: CBI-K-DP04S007
The JBD DP04S007 is a smart BMS for 3 to 4 series lithium packs, the size most often used to replace a 12 V lead-acid battery. JBD's LiFePO4 specification sheet lists 60 to 150 A continuous, while JBD's product page also offers a 200 A version. It uses a common port for charge and discharge, has Bluetooth built in so every cell can be checked from a phone, and provides a UART port for a display or PC. Typical cell protection limits are 3.75 V for overcharge and 2.20 V for over-discharge. JBD makes several derivatives: vehicle starting versions, series-capable versions and versions with a heating function. Tell us how the pack will be used, such as engine starting, RVs or 12 V marine systems, and the CBI team will help choose the version and current rating.

BMS JBD OH20SA01 8S sampai 20S LiFePO4 100A sampai 200A
SKU: CBI-K-OH20SA01
The JBD OH20SA01 is an acquisition-chip and MCU based BMS for high-current LiFePO4 packs of 8 to 20 series. JBD offers continuous ratings of 100, 120, 150 and 200 A, which suits heavily loaded 24 V (8S) and 48 V (16S) packs. Charge and discharge share one port. Protection parameters can be changed with JBD's PC software, and the board has one on-board temperature sensor plus two external sensors. UART is standard, while isolated RS485, CAN, Bluetooth, heating and an LCD are available as options. The official datasheet is on the jbdbms.com Download page. Send your voltage, load current and communication needs on WhatsApp and the CBI team will help define the configuration to order.

BMS JBD SP22S003 6S sampai 22S LiFePO4 40A sampai 100A (24 V, 48 V)
SKU: CBI-K-SP22S003
The JBD SP22S003 is a smart BMS with built-in Bluetooth for 6 to 22 series LiFePO4 packs. That range covers the layouts most often built in Indonesia, 8S for 24 V and 16S for 48 V, with continuous current options from 40 to 100 A. According to JBD's specification sheet, the board detects the series count automatically, uses passive balancing that starts at 3.35 V, and measures temperature at three points: one external sensor, one on the MOSFETs and one on the balancing resistors. JBD's product page lists peak currents of 120 to 300 A depending on the version. The SP22S003 suits e-bike, electric motorcycle and small storage packs that do not need RS485 or CAN communication with an inverter. For inverter-connected packs, see the JBD UP16S019 BMS.

JBD Active Balancer 5A untuk Pack 4S dan 8S
SKU: CBI-K-JBDBAL5A
Passive balancing in a BMS bleeds excess charge as heat at a small current, usually tens of milliamps. On large packs, evening out cell voltages that way can take a long time. The JBD active balancer moves energy from higher cells to lower cells at up to 5 A. JBD makes it in two sizes: 4S for 12 V packs and 8S for 24 V packs. Both work with LiFePO4, Li-ion and LCO cells. The 4S version starts at a pack voltage of about 12.5 V with ±10 mV accuracy, and the 8S version starts at about 25.6 V. The balancer complements the BMS rather than replacing it. Voltage, current and temperature protection stay with the BMS. In the CBI workshop we recommend an active balancer for packs that see frequent deep cycles or whose cells have started to drift apart.
