
Every material batch is tested for purity, particle size distribution, and electrochemical stability before official dispatch.
We serve university research laboratories, prototype trials, and industrial-scale supply with official tax invoices and cooperation agreements.
Technical Description
Specification Parameters
| Jumlah seri didukung | 3 sampai 4 S |
| Tegangan sistem | 12 V |
| Jenis sel | LiFePO4 (JBD juga membuat versi NMC) |
| Arus kontinu | 60 sampai 150 A menurut lembar spesifikasi; halaman produk menawarkan 60, 100, 150, dan 200 A |
| Tegangan pengisian | 3,6 V per sel |
| Rentang tegangan sel | 2,20 sampai 3,75 V |
| Proteksi tegangan lebih sel | 3,75 V (pulih 3,60 V) |
| Proteksi tegangan kurang sel | 2,20 V (pulih 2,60 V) |
| Port | Common port (isi dan pakai satu port) |
| Balancing | Pasif |
| Komunikasi | UART, Bluetooth bawaan |
| Konsumsi daya | 10 mA saat bekerja, 800 µA saat tidur |
| Suhu kerja | -20 sampai 75 °C |
| Ukuran papan | 160 × 105 mm; tebal 17 mm di lembar spesifikasi, 10 mm di halaman produk |
| Varian | Starter kendaraan, rangkai seri (S), dan pemanas (K-H) |
Related Products
View all in this category
BMS JBD OH20SA01 8S sampai 20S LiFePO4 100A sampai 200A
SKU: CBI-K-OH20SA01
The JBD OH20SA01 is an acquisition-chip and MCU based BMS for high-current LiFePO4 packs of 8 to 20 series. JBD offers continuous ratings of 100, 120, 150 and 200 A, which suits heavily loaded 24 V (8S) and 48 V (16S) packs. Charge and discharge share one port. Protection parameters can be changed with JBD's PC software, and the board has one on-board temperature sensor plus two external sensors. UART is standard, while isolated RS485, CAN, Bluetooth, heating and an LCD are available as options. The official datasheet is on the jbdbms.com Download page. Send your voltage, load current and communication needs on WhatsApp and the CBI team will help define the configuration to order.

BMS JBD SP22S003 6S sampai 22S LiFePO4 40A sampai 100A (24 V, 48 V)
SKU: CBI-K-SP22S003
The JBD SP22S003 is a smart BMS with built-in Bluetooth for 6 to 22 series LiFePO4 packs. That range covers the layouts most often built in Indonesia, 8S for 24 V and 16S for 48 V, with continuous current options from 40 to 100 A. According to JBD's specification sheet, the board detects the series count automatically, uses passive balancing that starts at 3.35 V, and measures temperature at three points: one external sensor, one on the MOSFETs and one on the balancing resistors. JBD's product page lists peak currents of 120 to 300 A depending on the version. The SP22S003 suits e-bike, electric motorcycle and small storage packs that do not need RS485 or CAN communication with an inverter. For inverter-connected packs, see the JBD UP16S019 BMS.

BMS JBD UP16S019 16S 100A ESS LiFePO4 48 V (Bluetooth + WiFi)
SKU: CBI-K-UP16S019
The JBD UP16S019 is a battery management system designed by JBD for home energy storage batteries and inverters. The version we use in the CBI workshop is the 16-series LiFePO4, 100 A board with Bluetooth and WiFi, ordering code JBD-UP16S019-L16S-100A-100AB-K-R-C. It uses a common port for charge and discharge, limits charging current to 10 A as standard, and talks to inverters over isolated RS485 and CAN. According to JBD, the protocols cover inverters such as Pylon, Growatt, Voltronic, Deye, GoodWe, Victron, SMA and others. The phone app shows cell voltages, temperatures and event history. For 48 V pack builders, the board brings six temperature sensing points, pre-discharge to soften inverter inrush, parallel pack support and secondary protection. The LCD and the RS485 PC cable are sold separately. JBD also offers 150 A and 200 A versions. Send us your pack layout and inverter brand on WhatsApp and the CBI team will help confirm the right version and settings.

JBD Active Balancer 5A untuk Pack 4S dan 8S
SKU: CBI-K-JBDBAL5A
Passive balancing in a BMS bleeds excess charge as heat at a small current, usually tens of milliamps. On large packs, evening out cell voltages that way can take a long time. The JBD active balancer moves energy from higher cells to lower cells at up to 5 A. JBD makes it in two sizes: 4S for 12 V packs and 8S for 24 V packs. Both work with LiFePO4, Li-ion and LCO cells. The 4S version starts at a pack voltage of about 12.5 V with ±10 mV accuracy, and the 8S version starts at about 25.6 V. The balancer complements the BMS rather than replacing it. Voltage, current and temperature protection stay with the BMS. In the CBI workshop we recommend an active balancer for packs that see frequent deep cycles or whose cells have started to drift apart.
