
Every material batch is tested for purity, particle size distribution, and electrochemical stability before official dispatch.
We serve university research laboratories, prototype trials, and industrial-scale supply with official tax invoices and cooperation agreements.
Technical Description
Specification Parameters
| Jumlah seri | 4S atau 8S |
| Jenis sel | LiFePO4, Li-ion, LCO |
| Arus balancing | 5 A (versi 8S: 0 sampai 5 A sesuai selisih tegangan 0 sampai 1 V) |
| Tegangan sel yang diseimbangkan | 3 sampai 4,2 V (4S); 3,2 sampai 4,2 V (8S) |
| Tegangan mulai bekerja | 12,5 ± 1 V (4S); 25,6 ± 1,5 V (8S) |
| Akurasi balancing (4S) | ±10 mV |
| Konsumsi daya | 4S: tidur kurang dari 200 µA; 8S: bekerja ≤20 mA, mati ≤400 µA |
| Suhu kerja (8S) | -30 sampai 70 °C |
| Ukuran | 70 × 56 × 21 mm (4S); 137 × 58 × 16 mm (8S) |
| Kode model 4S | B04S003-L4S-5A |
Related Products
View all in this category
BMS JBD DP04S007 4S 12 V LiFePO4 (100A, 150A, 200A)
SKU: CBI-K-DP04S007
The JBD DP04S007 is a smart BMS for 3 to 4 series lithium packs, the size most often used to replace a 12 V lead-acid battery. JBD's LiFePO4 specification sheet lists 60 to 150 A continuous, while JBD's product page also offers a 200 A version. It uses a common port for charge and discharge, has Bluetooth built in so every cell can be checked from a phone, and provides a UART port for a display or PC. Typical cell protection limits are 3.75 V for overcharge and 2.20 V for over-discharge. JBD makes several derivatives: vehicle starting versions, series-capable versions and versions with a heating function. Tell us how the pack will be used, such as engine starting, RVs or 12 V marine systems, and the CBI team will help choose the version and current rating.

BMS JBD OH20SA01 8S sampai 20S LiFePO4 100A sampai 200A
SKU: CBI-K-OH20SA01
The JBD OH20SA01 is an acquisition-chip and MCU based BMS for high-current LiFePO4 packs of 8 to 20 series. JBD offers continuous ratings of 100, 120, 150 and 200 A, which suits heavily loaded 24 V (8S) and 48 V (16S) packs. Charge and discharge share one port. Protection parameters can be changed with JBD's PC software, and the board has one on-board temperature sensor plus two external sensors. UART is standard, while isolated RS485, CAN, Bluetooth, heating and an LCD are available as options. The official datasheet is on the jbdbms.com Download page. Send your voltage, load current and communication needs on WhatsApp and the CBI team will help define the configuration to order.

BMS JBD SP22S003 6S sampai 22S LiFePO4 40A sampai 100A (24 V, 48 V)
SKU: CBI-K-SP22S003
The JBD SP22S003 is a smart BMS with built-in Bluetooth for 6 to 22 series LiFePO4 packs. That range covers the layouts most often built in Indonesia, 8S for 24 V and 16S for 48 V, with continuous current options from 40 to 100 A. According to JBD's specification sheet, the board detects the series count automatically, uses passive balancing that starts at 3.35 V, and measures temperature at three points: one external sensor, one on the MOSFETs and one on the balancing resistors. JBD's product page lists peak currents of 120 to 300 A depending on the version. The SP22S003 suits e-bike, electric motorcycle and small storage packs that do not need RS485 or CAN communication with an inverter. For inverter-connected packs, see the JBD UP16S019 BMS.

BMS JBD UP16S019 16S 100A ESS LiFePO4 48 V (Bluetooth + WiFi)
SKU: CBI-K-UP16S019
The JBD UP16S019 is a battery management system designed by JBD for home energy storage batteries and inverters. The version we use in the CBI workshop is the 16-series LiFePO4, 100 A board with Bluetooth and WiFi, ordering code JBD-UP16S019-L16S-100A-100AB-K-R-C. It uses a common port for charge and discharge, limits charging current to 10 A as standard, and talks to inverters over isolated RS485 and CAN. According to JBD, the protocols cover inverters such as Pylon, Growatt, Voltronic, Deye, GoodWe, Victron, SMA and others. The phone app shows cell voltages, temperatures and event history. For 48 V pack builders, the board brings six temperature sensing points, pre-discharge to soften inverter inrush, parallel pack support and secondary protection. The LCD and the RS485 PC cable are sold separately. JBD also offers 150 A and 200 A versions. Send us your pack layout and inverter brand on WhatsApp and the CBI team will help confirm the right version and settings.
