Jenis Baterai

LiFePO4 (LFP) Batteries: Pros, Cons and Applications

CBI
Tim Cimahi Battery Industry
•
20 November 2026
•
6 min read
“2 V. This article covers how it differs from other lithium batteries, its advantages and drawbacks, and its use in solar storage, UPS and electric vehicles.”

LiFePO4 (LFP) is a lithium battery type with a nominal cell voltage of about 3.2 V. This article covers how it differs from other lithium batteries, its advantages and drawbacks, and its use in solar storage, UPS and electric vehicles.

The name LiFePO4 appears more and more often in battery shops, especially for solar energy storage, UPS units and lead-acid battery replacement. What exactly is LiFePO4, and how does it differ from other lithium batteries?

What is LiFePO4?

LiFePO4 is the chemical formula of lithium iron phosphate. It is often abbreviated as LFP.

All lithium-ion batteries work by moving lithium ions back and forth between two electrodes. What mainly distinguishes one type from another is the cathode material, the material at the positive electrode. In an LFP battery, the cathode is LiFePO4. In other types, the cathode can be a mix of nickel, manganese and cobalt (known as NMC or NCM), or cobalt oxide (LCO).

This difference in cathode material is what gives LFP batteries their different properties.

LFP cell voltage

One LFP cell has a nominal voltage of about 3.2 volts, lower than NMC lithium cells, which are usually about 3.6 to 3.7 volts. This makes LFP pack configurations easy to recognize:

  • 4S — Nominal voltage: 12.8 V; Commonly used as: 12 V lead-acid battery replacement
  • 8S — Nominal voltage: 25.6 V; Commonly used as: 24 V systems
  • 16S — Nominal voltage: 51.2 V; Commonly used as: 48 V systems, such as solar (PLTS) inverters

How to read series configurations such as 4S and 16S is explained in the article Lithium Battery Basics: Cell, Module and Battery Pack.

Advantages of LiFePO4

1. More thermally stable. The chemical structure of the LFP cathode binds oxygen strongly, so it decomposes less easily at high temperature than nickel- and cobalt-based cathodes. This is why LFP is often chosen when safety is the main consideration, for example for batteries installed inside homes or buildings.

2. Long service life. LFP usually withstands a very large number of charge cycles. The exact number depends on cell quality, depth of discharge, temperature and current. So be wary of cycle-count claims that do not state the test conditions.

3. No nickel or cobalt. The raw materials are easier to obtain, and LFP cells are generally more competitively priced than types that use cobalt.

4. Stable voltage during use. LFP cell voltage is relatively flat from full charge to nearly empty, so devices get a consistent voltage.

Disadvantages of LiFePO4

1. Heavier and larger for the same energy. LFP has a lower energy density than NMC. For devices where weight matters a lot, such as drones, NMC is more often used.

2. State of charge is hard to estimate from voltage. The flat voltage that is an advantage above becomes a drawback here: the voltage at 70% and at 40% charge differs only slightly. For this reason, a good LFP pack uses a BMS that counts the current going in and out, rather than only reading voltage.

3. Must not be charged when too cold. Like other lithium batteries, LFP must not be charged below freezing. In Indonesia this is rarely a problem, except at high mountain sites or in cold rooms.

4. Lower voltage per cell. For the same pack voltage, more cells in series are needed than with NMC.

LiFePO4 vs NMC at a glance

  • Nominal cell voltage — LiFePO4 (LFP): About 3.2 V; NMC / NCM: About 3.6 to 3.7 V
  • Energy density — LiFePO4 (LFP): Lower; NMC / NCM: Higher
  • Thermal stability — LiFePO4 (LFP): Higher; NMC / NCM: Lower
  • Service life — LiFePO4 (LFP): Usually longer; NMC / NCM: Usually shorter
  • Nickel/cobalt content — LiFePO4 (LFP): None; NMC / NCM: Yes
  • Suited to — LiFePO4 (LFP): Energy storage, UPS, vehicles where weight is less critical; NMC / NCM: Devices that need a lot of energy in a small size and low weight

Common uses of LiFePO4

  • Solar energy storage (PLTS). Cycled every day and placed inside buildings, so service life and safety are key.
  • UPS and backup batteries, including 12-volt lead-acid battery replacements.
  • Electric vehicles such as electric bicycles, electric motorcycles, buses and forklifts.
  • Boats, caravans and outdoor equipment.

What to check when buying

1. Ask for the nominal voltage and the capacity in watt-hours (Wh), not only ampere-hours.

2. Make sure there is a BMS and ask about its current limit.

3. Use a LiFePO4 charger. The LFP charging profile differs from lead-acid and from other lithium types.

4. Ask for the test conditions behind any cycle-count claim.

From materials to packs

Cimahi Battery Industry manufactures prismatic cells and builds custom battery packs in Cimahi. For research needs, CBI also supplies cathode materials, including LiFePO4 powder for battery development.

Looking for a ready-to-install LiFePO4 battery for a home or solar system? Our partner, Batari Energy, offers backup batteries and a battery capacity calculator at batarienergy.com/kalkulator-baterai.

Contact us via WhatsApp +62 822 6090 4770 or email cimahibattery@gmail.com.

Looking for an assembled LiFePO4 battery? See 12 V to 48 V LiFePO4 batteries assembled by CBI, or LiFePO4 prismatic cells if you want to build your own.

Battery Consultation & Engineering

Need Battery Pack Engineering or Material Testing?

Discuss industrial-grade custom lithium battery assembly or laboratory material testing directly with CBI engineers.

← Back to All ArticlesPT Cimahi Baterai Indonesia